Key points for safety production of high temperature aluminum alloy die casting plant in summer

In many automobile, electric vehicle, electronics and other industries, there are a lot of such die castings, and the matters needing attention in aluminum alloy die casting work. First of all, in high temperature weather, fire prevention measures must attract the attention of 100 million metal products. In order to prevent the occurrence of safety accidents, ensure the health of die-casting personnel and the normal use of die-casting equipment, Heyi metal products strictly require our management personnel to do the following, in order to effectively ensure the safe and orderly production of die-casting workshop. Also consider the demoulding problem, because in the processing process, if the demoulding phenomenon is not safe, it is also a special problem to be paid attention to. Secondly, the thickness of the inner wall of the die casting should be carefully considered. If the thickness is too large and the gap is too large, the filling will be affected. Understand the matters needing attention in summer construction of Xinyao die casting plant.

1. Cooling and heatstroke prevention measures

It's very hot in summer. In order to ensure the health of die-casting workers, Heyi metal products have prepared cooling drugs and drinks for our front-line operators, so as to prevent safety accidents of operators in work, and arrange two shifts to work in turn.

2. Safe use of electricity

Hot weather and electricity safety is one of the moments that Dongguan aluminum alloy die casting plant must pay attention to. We must check the circuit to make sure that the production goes on normally. Die casting production temperature is very high, in the summer, the general operators sweat, so it is easy to cause electric shock. There is much rain in summer, and the insulation performance of electrical equipment is also weakened, so we must require our operators to wear protective equipment.

3. Equipment safety, take protective measures

As the die casting is cold chamber casting, the normal operation of the equipment must be paid attention to in the process of die casting production. Lightning protection and wind protection measures should be taken in thunderstorm season to avoid liquid splashing in the furnace and causing safety accidents.